切换至 "中华医学电子期刊资源库"

中华神经创伤外科电子杂志 ›› 2021, Vol. 07 ›› Issue (04) : 252 -255. doi: 10.3877/cma.j.issn.2095-9141.2021.04.012

短篇论著

个性化聚醚醚酮植入物在儿童颅骨修补术中的临床应用及分析
吴水华1, 陈朝晖1, 范双石1, 李浩1, 王海阳2,()   
  1. 1. 410006 长沙,湖南省儿童医院神经外科
    2. 570100 海口,海南省儿童医院神经外科
  • 收稿日期:2021-02-05 出版日期:2021-08-11
  • 通信作者: 王海阳
  • 基金资助:
    湖南省卫生健康委员会一般项目(B2017118); 湖南省出生缺陷协同防治科技重大专项(2019SK1010)

Clinical application and analysis of personalized polyetheretherketone implants for children’s cranioplasty

Shuihua Wu1, Zhaohui Chen1, Shuangshi Fan1, Hao Li1, Haiyang Wang2,()   

  1. 1. Department of Neurosurgery, Hunan Children’s Hospital, Changsha 410006, China
    2. Department of Neurosurgery, Hainan Children’s Hospital, Haikou 570100, China
  • Received:2021-02-05 Published:2021-08-11
  • Corresponding author: Haiyang Wang
引用本文:

吴水华, 陈朝晖, 范双石, 李浩, 王海阳. 个性化聚醚醚酮植入物在儿童颅骨修补术中的临床应用及分析[J]. 中华神经创伤外科电子杂志, 2021, 07(04): 252-255.

Shuihua Wu, Zhaohui Chen, Shuangshi Fan, Hao Li, Haiyang Wang. Clinical application and analysis of personalized polyetheretherketone implants for children’s cranioplasty[J]. Chinese Journal of Neurotraumatic Surgery(Electronic Edition), 2021, 07(04): 252-255.

目的

探讨个性化聚醚醚酮(PEEK)植入物对儿童颅骨缺损修补的临床治疗效果。

方法

选取湖南省儿童医院神经外科自2017年3月到2020年4月收治的去骨瓣减压术后行颅骨修补术的9例颅骨缺损患儿(2~10岁)为研究对象。利用三维重建技术和三维打印技术制备个性化聚醚醚酮植入物,分别对9例患儿行颅骨缺损修补术治疗。采用回顾性分析法,比较术前术后的影像学图片,评价颅骨缺损的修复情况。

结果

所有患儿PEEK植入物贴合完好,颅骨修补塑性良好。CT与MRI检查未发现伪影干扰,患儿术后均未出现感染、颅内出血、皮下积液等并发症,未出现中枢神经系统以及全身其他器官的新发功能障碍。随访时间均满半年以上,患儿头颅外型发育正常,切口愈合良好,各项神经功能及认知功能恢复明显。

结论

对于儿童颅骨缺损修补手术,采用个性化PEEK植入物可更好地匹配缺损伤口形状,对脑组织起到保护作用,且PEEK材料的组织相容性良好,术后无不良反应。3D打印个性化PEEK植入物技术可广泛应用于儿童颅骨缺损修补术中。

Objective

To investigate the clinical therapeutic effect of personalized polyetheretherketone (PEEK) implant on repairing children’s skull defects.

Methods

Nine cases of pediatric patients with skull defects (2-10 years) who underwent skull repair after debone valve decompression in Neurosurgery Department of Hunan Chirdren’s Hospital from March 2017 to April 2020 were selected. Nine children were treated with skull defect repair respectively with personalized PEEK implant which was prepared through three-dimensional reconstruction technology and three-dimensional printing technology. Retrospective analysis was applied to compare the preoperative and postoperative imaging pictures to evaluate the repair of skull defects.

Results

All children with PEEK implants were well fitted and well plastic for skull repair. CT and MRI examination showed no artifacts interference and the PEEK implant was stably fitted in pediatric patients after operation. All patients had no infection, intracranial hemorrhage, and subcutaneous effusion as well as dysfunction of organs of the body including central nervous system, and no other long-term complications appeared. All patients were followed up for more than half a year. The incision recovered well with no deformity in the head of the child. Neurological and cognitive functions recovered significantly.

Conclusion

The application of personalized PEEK implants can better match the shape of the defect and protect the brain tissue. The PEEK material has good biocompatibility and no adverse reactions occurred after surgery. 3D printing personalized PEEK implant technology can be widely used in children’s cranioplasty.

表1 9例患儿的临床资料
图1 患儿行PEEK颅骨修补成形术术前术后的影像学资料
[1]
Ma IT, Symon MR, Bristol RE, et al. Outcomes of titanium mesh cranioplasty in pediatric patients[J]. J Craniofac Surg, 2018, 29(1): 99-104.
[2]
Setti L, Fraleoni-Morgera A, Mencarelli I, et al. An HRP-based amperometric biosensor fabricated by thermal inkjet printing[J]. Sensors & Actuators B Chemical, 2007, 126(1): 252-257.
[3]
Ng ZY, Nawaz I. Computer-designed PEEK implants: a peek into the future of cranioplasty?[J]. J Craniofac Surg, 2014, 25(1): e55-e58.
[4]
Lethaus B, Safi Y, ter Laak-Poort M, et al. Cranioplasty with customized titanium and PEEK implants in a mechanical stress model[J]. J Neurotrauma, 2012, 29(6): 1077-1083.
[5]
Tan ET, Ling JM, Dinesh SK. The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer[J]. J Neurosurg, 2016, 124(5): 1531-1537.
[6]
Schuss P, Vatter H, Marquardt G, et al. Cranioplasty after decompressive craniectomy: the effect of timing on postoperative complications[J]. J Neurotrauma, 2012, 29(6): 1090-1095.
[7]
中华神经外科学会神经创伤专业组,中华创伤学会神经损伤专业组,中国神经外科医师协会神经创伤专家委员会. 创伤性颅骨缺损成形术中国专家共识[J]. 中华神经外科杂志, 2016, 32(8): 767-770.
[8]
张国斌,张述升,王修玉, 等. 以聚醚醚酮植入体行颅骨缺损成形术的随访与疗效分析[C]//中国中西医结合学会会议论文集,广州, 2019. 广州, 中国中西医结合学会神经外科专业委员会第六届学术大会暨广东省中西医结合学会神经外科专业委员会2019年学术年会及继续教育学习班, 2019.
[9]
侯晓峰,张春阳,赵文忠, 等. 结合小儿颅骨生长规律及猪颅骨缺损修补实验探讨小儿颅骨缺损手术时机[J]. 中国医刊, 2013, 48(5): 76-78.
[10]
孙里杨,郭峰,王列, 等. 钛板修补小儿颅骨缺损的临床应用[J]. 浙江创伤外科, 2007, 12(1): 49-50.
[11]
朱凤军,孙洋,李聪, 等. 深低温保存自体颅骨修补术在六岁以下患儿的应用研究[J]. 中华小儿外科杂志, 2019, 40(7): 593-597.
[12]
陈拓宇,张玉琪,崔福斋, 等. 仿生骨材料行儿童颅骨缺损修补的临床研究[J]. 中华神经外科杂志, 2016, 32(4): 353-357.
[13]
徐书翔,方陆雄,漆松涛. 钛夹辅助钛网修补幼儿颅骨缺损三例[J]. 中华创伤杂志, 2016, 32(2): 176-177.
[14]
张国斌,张述升,靳峥, 等. 以聚醚醚酮植入体行颅骨缺损成形术的初步研究[J]. 天津医药, 2017, 45(8): 806-809,封2.
[15]
杨晓楠,翟震,祁佐良, 等. 儿童大面积颅骨缺损聚醚醚酮植入感染后序列化治疗一例[J]. 中国修复重建外科杂志, 2018, 32(12): 1623-1624.
[1] 刘竹影, 周年苟, 李泳祺, 周丽斌. 空心环钻联合手术导板用于自体牙移植牙槽窝备洞[J]. 中华口腔医学研究杂志(电子版), 2023, 17(06): 418-423.
[2] 张辉, 蔡敏, 黄湘雅. 数字化技术和人工智能在上颌窦底提升术的临床应用[J]. 中华口腔医学研究杂志(电子版), 2023, 17(04): 244-252.
[3] 陈世远, 余朝文, 高涌, 王孝高, 张克霏. 3D打印、体外开窗、CTA与DSA融合在胸腹主动脉瘤腔内治疗中的应用[J]. 中华普通外科学文献(电子版), 2023, 17(02): 128-128.
[4] 钟文文, 李科, 刘碧好, 蔡炳, 脱颖, 叶雷, 马波, 瞿虎, 汪中扬, 王德娟, 邱剑光. 不同比例聚乳酸/丝素蛋白复合支架在兔尿道缺损修复中的疗效[J]. 中华腔镜泌尿外科杂志(电子版), 2023, 17(05): 516-522.
[5] 刘宗毅, 邵志强, 刘子丰, 许宗昱, 郭丰富. 腹腔镜保留肾单位手术治疗中央型肾癌的研究进展[J]. 中华腔镜泌尿外科杂志(电子版), 2022, 16(05): 468-471.
[6] 王祎, 王峻峰, 杨超, 晋云, 胡苹苹. 数字医学技术在肝脏分段及解剖性肝切除中的应用现状[J]. 中华肝脏外科手术学电子杂志, 2023, 12(01): 16-21.
[7] 刘文瑛, 欧阳再兴, 朱剑华, 吴黎明, 谭勇, 宋灏, 朱玉珍, 黄从云. 多模态影像技术在精准肝癌肝切除中的应用[J]. 中华肝脏外科手术学电子杂志, 2022, 11(06): 574-579.
[8] 冷昭富, 汪永新. 儿童去骨瓣减压术后颅骨成形术的研究进展[J]. 中华神经创伤外科电子杂志, 2023, 09(05): 313-317.
[9] 郭鹏, 李锦平. 去骨瓣减压术后与颅骨缺损相关的并发症及其防治[J]. 中华神经创伤外科电子杂志, 2023, 09(02): 119-122.
[10] 李长栋, 王志宏, 蔡霞. 成人颅骨修补术后并发症及其防治策略[J]. 中华神经创伤外科电子杂志, 2023, 09(02): 108-111.
[11] 金浪, 石洁, 黄正, 贾永伟, 张建坡, 魏礼成, 金昊雷. 3D打印数字技术辅助改良交叉PVP对重度骨质疏松性椎体压缩骨折脊柱-骨盆矢状面平衡状态的影响[J]. 中华老年骨科与康复电子杂志, 2023, 09(05): 263-268.
[12] 吕东, 朱盛, 胡秋平, 邹松, 黄文强, 唐全进, 黄海. 基于增强CT与增强MRI融合的3D打印导板辅助脑肿瘤穿刺活检一例报道[J]. 中华脑科疾病与康复杂志(电子版), 2023, 13(04): 251-254.
[13] 袁杰, 武孝刚, 王金标, 刘璐, 王春琳. 3D打印聚醚醚酮材料在颅脑损伤后颅骨成形术中的应用疗效分析[J]. 中华脑科疾病与康复杂志(电子版), 2022, 12(05): 274-278.
[14] 高尔涵, 张硕, 齐岩松, 王一帆. 3D打印个别托盘在全口义齿修复中的临床应用[J]. 中华临床医师杂志(电子版), 2023, 17(03): 255-259.
[15] 陈雄焕, 胡培阳. 3D打印模型在骨盆骨折外固定训练中的效果研究[J]. 中华卫生应急电子杂志, 2023, 09(03): 163-165.
阅读次数
全文


摘要